22 fret Maple neck Chrome die-cast machine heads S-style Ash body in glossy Seafoam Green White Pearloid 3-Ply SSS pickguard Fender Hot Noiseless Jeff Beck signature pickups 1x Volume, 1x Tone, 5-Way Pickup Selector Switch Standard 2 point tremolo Chrome hardware
Octavix delivers the definitive late 1960’s fuzzed out, octave up sound together with modern enhancements that update the classic concept.
Housed in EHX’s rugged nano package, the Octavix features Volume, Boost and Octave knobs. Volume regulates the output level of the pedal. Boost controls the amount of fuzz and Octave adjusts the volume of the octave above. A mini-toggle lets the player select between 9 or 24 volt power rails and determines the power supply voltage for the entire circuit. At 9V the pedals behaves like the classic, saggy fuzz box. At 24V the Octavix delivers a tighter sound and a richer octave tone. True bypass ensures maximum signal path integrity.
A period-evocative, psychedelic design and blue LED contribute to the pedal’s vintage vibe.
Classic octave up + fuzz effect pedal
Switchable 9 and 24 volt power rails give a saggy or tight sound
The MXR Carbon Copy Analog Delay goes from crisp «bathroom» slap echoes to epic, Gilmouresque delays.
Featuring 600ms of delay time with optional modulation, and a three-knob layout that controls Delay, Mix, and Regen. In addition, there are two internal trim pots that offer user-adjustable width and rate control of the modulation for even more tonal options.
All done by a completely analog audio path for authentic rich, warm analog delay—made possible only by old-school analog bucket brigade technology.
A phenomenal-sounding pedal from T-Rex Engineering Denmark, that takes the original swirling vibe sound and gives it an extra bite – with more voltage (12V DC) hurling the sound around the room. Spinning, whirling, shimmering and pulsating.
The main controls are Depth, Speed and overall Level, while a Mode button takes you from the rotating speaker to a vibrato effect. A trimmer control on the underside of the pedal tunes the phase and intensity of the vibe.
The new single channel Carl Martin PlexiTone was designed in association with Pete Thorn, and is housed in a small pedal-board friendly housing with 3 knobs and 1 switch. Apart from Pete’s slight modifications that give this new pedal a tighter bottom-end and slightly softer high frequencies, it is exactly the same gain structure as the High Gain setting on the original Pro-Series PlexiTone….it just plays better with different amps.
The single Plexi also incorporates our new DC-DC converter circuitry, so the pedal can be powered by a regulated 9V Power Supply but will still operate on the same +-12V level as the original AC powered PlexiTone. This allows us to use the same high quality components which provide the same tone and headroom that make the CM Pro-Series stand out from the rest!
The Level knob adjusts the overall level of the Plexi- Tone. By adjusting this knob (in conjunction with the gain) you can match or exceed the bypass signal for rhythm or solo work.
The Drive knob adjusts the amount of overdrive, from light crunch; at full counter-clockwise, to full, fat overdrive with loads of sustain at full clockwise…. and everything in between. Regardless of the amount of overdrive, the PlexiTone always produces those great Brittish tones that seem to cut right through the mix in both live and recording sessions.
The Tone knob on the PlexiTone, is a high cut filter. With the knob set at full clockwise, you enjoy the full bandwidth of frequencies, so as you turn the knob counter clockwise, you start to filter out the high frequencies. This allows you to fine tune your tone regardless of which guitar/pickup you are using. You might find at high gain settings that reducing the highs will tighten up the sound, and at lower gain settings, the high frequencies will add some bite and crispness to your notes.
Hand-built 120-Watt hi-gain
amplifier driven by 4 x 5881 tubes (now fully compatible with 6L6
and EL34, etc.)
Classic split channel preamp
design (Clean, Lead) featuring 3 x ECC83 tubes for 90’s metal rock
Integrated high-class reverb with
dedicated Reverb controls for each channel
Revolutionary INFINIUM Tube Life
Multiplier technology:– Extends the life of your amplifier’s
expensive power tubes up to 20 times.– Provides incredible
reliability and consistent tone over the complete lifespan of your
tubes – No need for expensive matched tube sets– Allows you to
mix and match any combination of compatible tube types and brands –
Monitors performance of each power tube continuously and displays
defective tubes to allow for easy and individual replacement
Vintage Equalizer section with
dedicated Bass, Mid, Treble and Presence controls
Power switch to select between pentode or triode (60 Watt)
FX Loop with dedicated Level control
Frequency compensated Recording output
Heavy-duty footswitch for Channel selection and Reverb included
Impedance switch (4, 8 and 16 Ohms) to match virtually any speaker cabinet