​Features/Specifications:

• Power: RMS 30 Watts
• Inputs: Hi & Lo Jacks
• Channels: 2
• Equalisation: Bass, Middle, Treble
• Bright Switch: Yes: On Clean Channel
• Preamp Valves: Premium ECC83
• Output Valves: Premium EL84
• Class: Class A
• Reverb Yes
• Speaker connections: Jack
• FX Loop(s) Yes
• Impedance: Minimum 4 ohms
• Drivers: 2 x 12″ Celestion 70 Eighty
• Dimensions: (mm) 520 x 676 x 250

Amp modelling:
A/D conversion = 24-bit
D/A conversion = 24-bit
Sampling Frequency = 44.1 kHz

Speaker:
1 x 5″ Standard Speaker
3 Watts RMS 4 Ohms

Inputs:
1 x Normal Input Jack
1 x Mic Input Jack
1 x Aux Input Jack
Outputs:
1 x Headphone Jack

Controls:
Volume
Gain
Tone
Amp Model Selector
Effects Selector
Delay/Reverb Selector
Mic Trim
Mic Send
Tuner

12-Watt 1×8″ Guitar Combo from the 80’s
Good old US made amp, currently in use on my workbench

The PM500 mixer features five mono input channels, the LF control frequency has been carefully selected on the PM500, allowing vocals or instruments to be finely tuned without losing their natural balance. The HF control is similarly designed to cut out unwanted harshness or excessive mid high range interference.

Features:

• One unit to balance and combine all instrument and microphone source inputs

• Quick and easy to set up

• Portable, light and easy to carry

• TAPE IN sockets allow cassette recorders or CD players to be added to the Main Output

• Digital Delay section allows adjustment of interval time, repeat rate and volume of the delays

• Designed with generous headroom to ensure excellent sonic quality is delivered continuously at both high and low frequencies

• Five mono input channels featuring separate Mic & line input

• Channel five features extra Tape In RCA socket

• Digital Delay

• Record Out

• Power On/Off on front of unit for easy use

• Parallel speaker outputs on rear of unit

• Main line output on rear of unit

• Built in 120 watt power amplifier

• Two band channel EQ

• XLR plus 1/4″ input socket

• Thermal protection

Orange Dark Terror 15-watt Guitar Amp Head Features:

• Gain, shape, and volume controls
• 1.5mm Zintec chassis with steel vented top case
• 7- or 15-watt Class A operation
• Tube-driven effects loop
• 3 x 12AX7 preamp tubes, 1 x 12AT7 effects loop tube, and 2 x EL84 output tubes
• Gig bag included
• Orange speaker cable
• 4×12″ Marshall MF280 with Vintage 30 speakers

FEATURES

• Ported bass design
• 60W
• 12″ special driver
• Carpet-covered cab
• Oversized corners
• Metal grille
• Effects loop
• 1/4″ line out
• Mid-scoop switch
• 4-band EQ
• CD input

TONY IOMMI’S BACKSTAGE AMP.
The TI15-112 takes all the raw power and tone of the TI100’s high gain channel and crams it into a compact single channel all tube amp.
Utilizing Laney’s unique dual wattage input option means you can push the EL84 output section hard and get 15 watts rms of full on tone or plug into the «less than 1 watt» and get exactly that – your same great tone but at less than 1 watt.

SPEAKER EMULATED RECORD OUT
The TI15-112 also features the cool flexibility of being able to record both silently, for late night recording sessions or in live situations via the SPEAKER EMULATED RECORD OUT feature on the rear panel.
The TI15-112 is finished of in Tony’s trade mark black and cross livery.

Inputs 1x Jack 15 Watts & 1x Jack 1 Watt
Power 15W
Channels Single IOMMI channel
Channel Controls Pre-Boost, Volume, Drive
Equalisation Bass, Middle,Treble, Dynamics and Tone
Preamp Valves 3x ECC83
Output Valves 2x EL84
Class AB
Footswitch Boss FS-5L
FX Loop(s) Yes – variable level FX loop
Driver 12″ Custom HH driver